Smart RGBCCT LED Controller Plus Work with Echo Plus Zigbee 3.0 Gateway Remote Control 24V 12V RGBWW Controller

Save $54.94

Color: 6-Zone Remote Only
Price:
Sale price$49.99 Regular price$104.93

Description

Zigbee Smart RGBCCT LED Controller Plus Work with Echo Plus Zigbee 3.0 Gateway Remote APP Phone Control 24V 12V RGBWW Controller




 
 
Attention: Please kindly note that our zigbee devices require related gateways,If you don't have any gateway, buy one remote or switch to work with the zigbee controller.
The remote and switch only works with ZigBee RGB+CCT Ccontroller Plus.
 
Features:
 
1.Zigbee controllers work with Zigbee gateways like Amazon ECHO Plus ,H*U*E,O*sr*am,etc,smartThings
2.Zigbee controllers work with H*ome K*-I-T :https://www.reddit.com/r/Gledopto/comments/amp3v9/i_wrote_a_little_guide_on_getting_the_gledopto/  
3.Sync your lights with movies ,music, and games,Enjoy the lighting effect which synchronizes with the plot of the picture immediately,and experience the more delicate atmosphere lighting effect.   
How to sync? please follow this   website:    http://www.screenbloom.com/  
Sync Show results:   https://youtu.be/zZjtJMy_774 
 
the plus controller works with  6-zone remote and Wall Switch
● Wide Compatibility.
● RGB CCT Wirelessly dimmable.
● 16 Millions of colors to choose.
● Voice control, Smartphone APP control.
 
Q&A or more info, please go to: https://www.reddit.com/r/Gledopto/
 

 

Parameters:
 
Product Name:ZIGBEE Strip Controller Plus
Model No.:GL-C-008S
Voltage: DC12V-24V
Output: Max. 6A/Channel, Total output Max.15A
Size: 89*48*23.5mm
Operating Temperature:-20-60°
Package:
 
RGBCCT Controller Plus Only
1pc* ZigBee Strip Controller 
1pc* User Manual
1pc* 3cm Stricker
 
6 Zone Remote Only
1pc* 6 Zone Remote
 
RGBCCT Controller Plus with Remote Set
1pc* ZigBee Strip Controller 
1pc* User Manual
1pc* 3cm Stricker
1pc* 6 Zone Remote
 
Wall Switch Only
1pc* Wall Switch
 
Instructions:
 
Thanks for buying our products.
In this manual we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices works with many ZigBee Light Link Gateways
Wire Connection:
1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable
cross-section must be between 0,33 and 2,08mm⊃2;(AWG22-14).
2. Now push down the terminal with a screwdriver and put in the cable, see picture P2.
3. Take the screwdriver away and the cable is connected with the terminal.
On picture P3-P7 you can see examples for the connection of different LED controllers:
- P3 for RGBW/RGBWW products
- P4 for RGB products, use a RGBW controller and don’t connect the wire W
- P5 for single color LED product, use a RGBW controller and don’t connect the wire
R, G, B
- P6 for RGB+CCT(warmwhite+coldwhite) products
- P7 for CCT(warmwhite+coldwhite) products
Connection with Gateway:
1. Connect the LED product to the controller see section “wire connection”.
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.
Reset:
1. Switch on your device.
2. Now switch off and on within 2 seconds.
3. Repeat off/on four times.
4. Reset is done when the device is switched on in the fifth time and the light stays on
after blinking 4 times.
gledopto
*For RGBW/RGBWW devices you will find two SSIDs. One for white/warmwhite, the other for RGB.

 

 

Payment & Security

American Express Apple Pay Diners Club Discover Elo Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed